Toshiba 39L4300UM User Manual page 59

2 Press the q (arrow) button then press the GREEN button.
The Brand screen will appear.
3 Use the p / q (arrow) buttons to select the brand name then
press the OK button.
4 Press the OK button.
Model Name screen will appear.
Model Name
1 Press the GREEN button.
The Model Name screen will appear.
2
Use the p / q (arrow) buttons to select the model name then
press the OK button.
3 Press the q (arrow) button to select Code Set then press the
OK button.
Code Set screen will appear.
Code Set
1
Use the t / u (arrow) buttons to select the code.
NOTE
If a model has more than one Code Set, a message will appear stating "This
model has more than one Code Set. Please select and test your preferred
Code Set." You will need to choose a code set using the p / q (arrow)
buttons and perform the Test option to ensure the correct Code Set has
been selected.
2 Press the OK. button
Input & Mode Key screen will appear.
Select a field and press the OK button to show the
❖
software keyboard. Enter the first few characters of the
brand name and press the GREEN button. The brand
name starting with the entered characters will appear on
the Brand screen.
Select a field and press the OK button to show the
❖
software keyboard. Enter the first few characters of the
model name and press the GREEN button. The model
name starting with the entered characters will appear on
the Model Name screen.
After the code is selected, press the RED button to show
❖
the Test screen. The test will start automatically.
Initial Setup and Menu
Performing the initial setup
59