Configuration B: Maximum Flexibility - HP DL360 - ProLiant - G3 Deployment Manual

HP ProLiant DL360 G3 Server High-Density Deployment
Configuration B:
Maximum Flexibility
(35 servers, high-voltage)
Table 8. Configuration B Summary
Configuration B Summary
Rack Contents
Units
35 Servers with all fixed or all sliding rails with cable trays
2 X 40 A PDUs
2 x 48 Port Ethernet switches
2 x 24 Port Ethernet switches
1 IP Console KVM Switch
35 Interface Adapters
4 Expansion Modules
1 TFT5600RKM
Internal Cables
70 standard IEC-IEC jumper cords going to from the servers to the Extension Bars
mounted at the rear of the rack
Cables External to Rack
35 (management) network cables from the Integrated Lights-Out Edition's RJ-45
connector to two external 24 port Ethernet switches, each with 22 10/100 ports
and 2 Gigabit ports
70 (data) network cables from the on-board 10/100/1000 NICs' RJ-45 connectors
to external 48 port Ethernet switches with 44 10/100 ports and 4 Gigabit ports,
assuming use of two LAN connections per server
4 high-voltage input power cords connecting from the PDUs to the facility AC power
feeds
Site Utility Requirements (worst-case)
Power: 4 dedicated 200V - 240V 50A branch circuits (2 from each separate feed,
assuming redundant power supply configuration).
Thermal: Up to 42,000 BTUs/hour (This number is a worst-case. The actual
BTUs/hour will depend on the OS/application software running and the server
hardware configurations.)
Weight: Up to 907.18 kg (2,000 lb). The network cables are not accounted for
since most implementations route the network cables to the ceiling-hung cable rails
outside of the rack.
The use of the Double-Bar mounting brackets for the Modular PDU is highly recommended. This
will allow the maximum number of outlets to be mounted on the same side of the rack enclosure as
the server power supply connection.
Preliminary
22