Power Configurations Examples; Suggested Configurations - HP DL360 - ProLiant - G3 Deployment Manual

HP ProLiant DL360 G3 Server High-Density Deployment
Power
Configurations
Examples
Suggested
Configurations
The high/low voltage and dual-power supply capabilities of the ProLiant DL360 G3
server makes it adaptable to a variety of power configurations. Each of the following
examples suggests a method of power distribution for a group of servers mounted in a
rack. These examples illustrate server power configurations only as well as ways to
accomplish server management using iLO and KVM switching products and do not take
into account such accessories as KVM switches and display monitors that are typically
included in an installation.
Table 6 is a Quick Reference table with suggested rack configurations for deploying
ProLiant DL360 G3 servers. Examples of these configurations are further explained later
in this section in Configurations A, B, and C.
Table 6. Suggested Rack Configurations Quick Reference
Configuration A
Maximum Performance
Priority
Density
42U
Rack Size
42
Server Count
High Voltage
Power Source
4 x 40 Amp Modular
PDU
PDU
No local KVM
KVM Switching
Switching
(iLO only)
No Local Console
Local Console
iLO Advanced
Lights-Out
Management
1 x 48 Port 10/100
IP Connections
Ethernet Switch
(44+4)* for iLO
6 x 16 Port Gigabit
Ethernet Switch for data
* 44 10/100 ports plus 4 Gigabit uplink ports
** 22 10/100 ports plus 2 Gigabit uplink ports
B
Maximum Flexibility with
Redundant Power
42U
35
High Voltage
4 x 40 Amp PDU
IP Console Switch
TFT5600RKM
iLO Advanced
2 x 24 Port 10/100
Ethernet Switch
(22+2)** for iLO
1 x 48 Port Gigabit
Ethernet Switch (44+4)*
for data
Preliminary
C
Traditionalist
42U
24
Low Voltage
4 x 24 Amp PDU
IP Console Switch
TFT5600 RKM
iLO Standard or
iLO Advanced
2 x 24 Port
10/100 Ethernet
Hub for iLO
2 x 48 Port
Gigabit Ethernet
Switch (44+4)*
for data
18