Installing and Removing a PCI Express* x16
Card
CAUTION
When installing a PCI Express* card on the Intel
the card is fully seated in the PCI Express* connector before you power on the system.
If the card is not fully seated in the connector, an electrical short may result across the
connector pins. Depending on the over-current protection of the power supply, certain
board components and/or traces may be damaged.
Installing Multiple PCI Express* x16 Graphics Cards
If you are installing a single PCI Express* x16 graphics card, install it in the PCI
Express* primary connector (Figure 19, A) for optimum performance. However, if you
are installing two PCI Express* x16 graphics cards, install them in the PCI Express*
x16 primary (Figure 19, A) and secondary connectors (Figure 19, B).
Figure 19. Installing Multiple PCI Express* x16 Graphics Cards
Updating the BIOS
®
Workstation Board WX58BP, ensure
39