Replacing The Backup Battery - Intel SE7221BK1 User Manual

Entry server board
Table of Contents

Advertisement

Intel® Entry Server Board SE7221BK1-E User Guide
Rack-mount chassis add-in procedure
The PCI Riser Bracket Assembly fits tightly against power connections on the server board. Be
very carful not to pinch or damage the electrical connections when installing and removing the
Bracket Assembly.
1.
Remove the riser bracket.
2.
Attach the riser connector to the bracket with the 2 screws accompanying the chassis.
3.
Insert the add-in PCI card into the riser connector. Tilting card while forcing into riser
will damage the add-in card.
4.
Use the 3
5.
Install the bracket assembly aligning the I/O edge with the slots in the back of the chassis
and the riser card into the server board adaptive slot.
6.
Push down firmly but carefully.

Replacing the Backup Battery

The lithium battery on the server board powers the RTC for up to ten years in the absence of power.
When the battery starts to weaken, it loses voltage, and the server settings stored in CMOS RAM in
the RTC (for example, the date and time) may be wrong. Contact your customer service
representative or dealer for a list of approved devices.
WARNING
There is a danger of explosion if the battery is incorrectly replaced. Replace
only with the same or equivalent type recommended by the equipment
manufacturer. Discard used batteries according to manufacturer's instructions.
ADVARSEL!
Lithiumbatteri - Eksplosionsfare ved fejlagtig håndtering. Udskiftning må kun
ske med batteri af samme fabrikat og type. Levér det brugte batteri tilbage til
leverandøren.
ADVARSEL
Lithiumbatteri - Eksplosjonsfare. Ved utskifting benyttes kun batteri som
anbefalt av apparatfabrikanten. Brukt batteri returneres apparatleverandøren.
VARNING
Explosionsfara vid felaktigt batteribyte. Använd samma batterityp eller en
ekvivalent typ som rekommenderas av apparattillverkaren. Kassera använt batteri
enligt fabrikantens instruktion.
rd
screw to connect the add-in card's bracket to the main bracket assembly.
Hardware Installations and Upgrades
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

Se7221bk1-e

Table of Contents