Intel SAI2 - Ss3/le Dual Fcpga Max-4GB Atx2pci-64 4pci-32 Vid Lan 133mhz Specification page 32

Basic Input Output System (BIOS)
After the F2 key is pressed, a few seconds might pass before Setup is entered while POST
finishes test and initialization functions that must be completed before Setup can be entered.
When Setup is entered, the Main Menu options page is displayed.
3.2.2.2 Keyboard Command Bar
The bottom portion of the screen provides a list of commands that are used for navigating the
Setup utility. These commands are displayed at all times, for every menu and submenu.
Each Setup menu page contains a number of features. Except those used for informative
purposes, each feature is associated with a value field. This field contains user-selectable
parameters. Depending on the security option chosen and in effect via password, a menu
feature's value can be changeable or not. If a value is cannot be changed due to insufficient
security privileges or other reasons, the feature's value field is inaccessible. The Keyboard
Command Bar supports the following:
F1 Help
Enter Execute Command
ESC Exit
Select Item
Select Item
Select Menu
F5/– Change Value
F6/+ Change Value
F9 Setup Defaults
22
Pressing F1 on any menu invokes the general Help window. This window
describes the Setup key legend. The up arrow, down arrow, Page Up, Page Down,
Home, and End keys scroll the text in this window.
The Enter key is used to activate submenus when the selected feature is a
submenu, or to display a pick list if a selected feature has a value field, or to select
a subfield for multi-valued features like time and date. If a pick list is displayed, the
Enter key will undo the pick list, and allow another selection in the parent menu.
The ESC key provides a mechanism for backing out of any field. This key will undo
the pressing of the Enter key. When the ESC key is pressed while editing any field
or selecting features of a menu, the parent menu is re-entered. When the ESC key
is pressed in any submenu, the parent menu is re-entered. When the ESC key is
pressed in any major menu, the exit confirmation window is displayed and the user
is asked whether changes can be discarded.
The up arrow is used to select the previous value in a pick list, or the previous
feature in a menu item's option list. The selected item must then be activated by
pressing the Enter key.
The down arrow is used to select the next value in a menu item's option list, or a
value field's pick list. The selected item must then be activated by pressing the
Enter key.
The left and right arrow keys are used to move between the major menu pages.
The keys have no affect if a submenu or pick list is displayed.
The minus key and the F5 function key are used to change the value of the current
item to the previous value. These keys scroll through the values in the associated
pick list without displaying the full list.
The plus key and the F6 function key are used to change the value of the current
menu item to the next value. These keys scrolls through the values in the
associated pick list without displaying the full list. On 106-key Japanese
keyboards, the plus key has a different scan code than the plus key on the other
keyboard, but it still has the same effect.
Pressing the F9 key causes the following to appear:
Setup Confirmation
Load default configuration now?
If "Yes" is selected and the Enter key is pressed, all Setup fields are set to their
default values. If "No" is selected and the Enter key is pressed, or if the ESC key is
[Yes] [No]
SAI2 Server Board TPS
Revision 1.0