Installing The I/O Shield - Intel S815EBM1 - Server Board Motherboard Quick Start Manual

Installing the I/O Shield

The server board comes with an I/O shield for use in general purpose chassis. If
integrating this board in a 1U chassis, please obtain an I/O shield from the
chassis vendor. When installed in the chassis, the shield blocks radio frequency
transmissions, protects internal components from dust and foreign objects, and
promotes correct airflow within the chassis.
Install the I/O shield before installing the server board in the chassis. Place the
shield inside the chassis and press the shield into place so that it fits tightly and
securely. If the shield doesn't fit, obtain a properly-sized shield from the chassis
supplier.
.787 .010 TYP
[20 0.254]
DTL M
SHT 2
O.039
[1]
.884
[22.45]
A
0.276
[7.012]
.000
[0]
.465
[11.811]
.567
[14.4]
14
6.390 REF
[162.3]
DTL D DTL P
9
SHT 2 SHT 2
Intel Server Board S815EBM1 Quick Start Guide
14
.063 .005
[1.6 0.12]
8X R0.5 MIN
A
.567
[14.4]
Pictorial
View
OM12390