Table of Contents
Advertisement
ADJUSTING STITCH SETTINGS
ADJUSTING STITCH SETTINGS
When a stitch is selected, the most appropriate stitch width, stitch length, and upper thread tension are
automatically set. However, if needed, you can change any of the settings as described in this section.
Note
• Settings for some stitches cannot be changed.
CHART" at the end of this manual).
• If a stitch setting is changed, but not saved, the stitch setting returns to its default when the machine is turned off or a
different stitch is selected.
Adjusting the Stitch Width
The stitch width (zigzag width) can be adjusted to make
the stitch wider or narrower.
Memo
If the foot controller is connected, the sewing speed
controller can be used to adjust the zigzag width (see
page 69).
Each press of
Each press of
Press
to return the setting to its default.
44
makes the zigzag stitch narrower.
makes the zigzag stitch wider.
indicates no change is possible (see the "STITCH SETTING
Adjusting the Stitch Length
The stitch length can be adjusted to make the stitch
coarser or finer.
Each press of
makes the stitch finer (shorter).
Each press of
makes the stitch coarser (longer).
Press
to return the setting to its default.
CAUTION
• If the stitches get bunched together, lengthen the
stitch length and continue sewing. Do not continue
sewing without lengthening the stitch length.
Otherwise, the needle may break and cause injury.
Hide quick links:
Advertisement
Chapters
Table of Contents
