Brother Innov-ís 2800D User Manual page 146

SEWING AN EMBROIDERING PATTERN
f
Apply a thin layer of adhesive or spray
adhesive to the back of the appliqué piece,
and then attach it to the base fabric at the
appliqué position sewn in step
Note
If the appliqué fabric is a lightweight fabric, you may
want to use a fusible web to stabilize the fabric and to
attach it to the base fabric. Do not remove the base
fabric from the embroidery frame when ironing on the
appliqué piece.
g
After the appliqué piece is attached, press the
"Start/Stop" button to sew the appliqué.
→ The appliqué is then completed.
Memo
Depending on the pattern that is selected, "APPLIQUÉ"
may not appear, but instead will appear as a color. If
"APPLIQUÉ" appears as a color, embroider using
thread of that color.
h
Change the upper thread, and then finish
embroidering the remainder of the pattern.
Note
• If glue is attached to the presser foot, needle or
needle plate, finish embroidering the appliqué
pattern, and then clean off the glue.
• For best results, trim all excess threads between
pattern parts.
144
e
.