Intel S5000PSLSAS Configuration Manual page 13

®
The Intel Server Chassis SC5400 is designed to work with boxed Intel
a 2U passive heat-sink.
5)
The production SC5400BRP KDK includes:

Redundant (1+0) 830-W PFC power supply with dual-line cord support (full redundancy requires an
additional 830-W module, which you must purchase separately)

Two non-redundant cooling fans

Support for six tool-free non hot-swap hard drives. Upgradeable to ten cabled or ten (6+4 configuration) hot-
swap SAS or SATA drives.

Cables (one each):

Front Panel Cable (baseboard header to front panel)

USB Cable (USB header to chassis front panel)

Pre-routed IDE cable

COM2 Cable

AC power cord is included only in SC5400BRPNA
®
The Intel Server Chassis SC5400 is designed to work with the boxed Intel
using a 2U passive heat sink.
6)
The production SC5400 Base KDK includes:

Non-redundant 670-W PFC power supply

Two non-redundant cooling fans

Support for six tool free non hot-swap hard drives. Upgradeable to six hot-swap SAS or SATA.

Quick start guide

Cables (one each):

Front Panel Cable (baseboard header to front panel)

USB Cable (USB header to chassis front panel)

Pre-routed IDE cables

COM2 Cable

AC power cord is included only with SC5400BASENA
®
The Intel Server Chassis SC5400BASE is designed to work with the boxed Intel
sequence using a 2U passive heat sink.
7)
The production SC5299WS SKU includes:

Non-redundant 670-W PFC power supply

Two non-redundant cooling fans with ducting

Support for six tool-free non hot-swap hard drives. Upgradeable to hot swap SAS/SATA 6-drive bay.

Cables (one each):

Front Panel Cable (USB header t chassis front panel)

USB Cable (USB header to chassis front panel)

AC power cord is included in SC5299WSNA
®
Xeon
®
Xeon
13
®
processor 5000 sequence using
®
processor 5000 sequence
® ®
Xeon processor 5000