Production Configuration And Ordering Steps (S5000Xvn) - Intel S5000PSLSAS Configuration Manual






Production Configuration and Ordering Steps (S5000XVN)

This section highlights the ordering steps and configurations for the Intel
information is in the following sections.
Step 1 – Select a Workstation Board
Workstation Board S5000XVNSATA
- 6 SATA 3Gb/s ports
- S5000X Chipset (Boxed or OEM 10-pack)
Step 2 – Select an Intel Server Chassis
SC5299WS
-
Fixed 670W power supply and fans
- Optional support for one hot-swap 6-drive bay
Step 3 – Select Optional Intel Drive Bays
AXX6DRV3GEXP
-
6 drive hot-swap SAS backplane kit
- Supported in SC5400 and SC5299 families
- Requires 2 SAS ports for SAS or SATA drive support
Step 9: Accessories that will or may have to be
purchased separately to create a complete system
Memory

533 MHz or 667MHz DDR2 Fully-Buffered DIMMs with a full-DIMM heat
spreader
 For SL5000PSLROMB, a 256MB (or up to 1GB) ECC DDR2-400 DIMM is
required and must be purchased separately
Cables
 1-2 power cables (unless using a SC5400BASENA, SC5400BRPNA,
SC5400LXNA, SC5299DPNA and SC5299BRPNA chassis in North
America)
 Ethernet cables
Hard disk drives, keyboard, monitor and mouse
CD/DVD
 Unless using AXXCDUSBFDBRK, AXXUSBFLOPPY and AXXSCD or
AXXDVDCDR (Step 7) in the SC5400 family of chassis
®
S5000XVN Workstation boards. More detailed
Workstation Board S5000XVNSAS
- 4 SAS ports
- S5000X Chipset (Boxed or OEM 10-pack)
SC5400Base
-
Fixed 670W power supply and fans
- Optional support for one 6-drive bay
AXX6DRV3G
-
6 drive hot-swap SAS/SATA backplane kit
- Supported in SC5400 and SC5299 families
- Requires 6 SAS ports for SAS and/or SATA drive support or 6
SATA ports for SATA drive support. Not supported with Intel
RAID controller SRCSAS144E.
8