Pass/Fail Test Criteria - Intel S5000PSLROMB Hardware Manual

Intel® Server Boards S5000PSL/S5000XSL, Intel® Workstation Board
S5000XVN, and Intel® Server System SC5400RA
1.2

Pass/Fail Test Criteria

For each operating system, adapter, and peripheral configuration, a test passes if specific
criteria are met. Specific configurations may have had particular characteristics that were
addressed on a case-by-case basis. In general, a configuration passes testing if the following
conditions are met:
The operating system installed without error.
Manufacturer's installation instructions or Intel's best-known methods were used for
-
the operating system installation.
- No extraordinary workarounds were required during the operating system installation.
- The server system behaved as expected during and after the operating system
installation.
Application software installed and executed normally.
-
Hardware compatibility tests ran to completion without error.
Test software suites executed successfully
Test and data files were created in the correct directories without error.
-
Files copied from client to server and back compare to the original with zero errors
-
reported.
- Clients remain connected to the server system.
- Industry standard test suites run to completion with zero errors reported.
The testing of the Intel
S5000XVN was performed with either Intel
Chassis SC5299-E.
Revision 2.9
®
Server Boards S5000PSL/S5000XSL and Intel
®
Server Chassis SC5400 or Intel
Introduction
®
Workstation Board
®
Entry Server
3