Bios Flash Memory Organization; Resource Configuration; Pci Autoconfiguration; Pci Ide Support - Intel D865PCK Specification

Intel Desktop Board D865PCK Technical Product Specification
Table 36 lists the BIOS Setup program menu features.
Table 36.

BIOS Setup Program Menu Bar

Maintenance Main
Clears Displays
passwords and processor
displays and memory
processor configuration
information
Table 37 lists the function keys available for menu screens.
Table 37.

BIOS Setup Program Function Keys

BIOS Setup Program Function Key
<←> or <→>
<↑> or <↓>
<Tab>
<Enter>
<F9>
<F10>
<Esc>

3.2 BIOS Flash Memory Organization

The Firmware Hub (FWH) includes an 8 Mbit (1024 KB) symmetrical flash memory device.

3.3 Resource Configuration

3.3.1 PCI Autoconfiguration

The BIOS automatically configures PCI devices. PCI devices may be onboard or add-in cards.
Autoconfiguration lets a user insert or remove PCI cards without having to configure the system.
When a user turns on the system after adding a PCI card, the BIOS automatically configures
interrupts, the I/O space, and other system resources. Any interrupts set to Available in Setup are
considered to be available for use by the add-in card.

3.3.2 PCI IDE Support

If you select Auto in the BIOS Setup program, the BIOS automatically sets up the
PCI IDE connector with independent I/O channel support. The IDE interface supports hard drives
up to ATA-66/100 and recognizes any ATAPI compliant devices, including CD-ROM drives, tape
drives, and Ultra DMA drives. The BIOS determines the capabilities of each drive and configures
them to optimize capacity and performance. To take advantage of the high capacities typically
available today, hard drives are automatically configured for Logical Block Addressing (LBA) and
64
Advanced Security
Configures Sets
advanced passwords
features and security
available features
through the
chipset
Description
Selects a different menu screen (Moves the cursor left or right)
Selects an item (Moves the cursor up or down)
Selects a field (Not implemented)
Executes command or selects the submenu
Load the default configuration values for the current menu
Save the current values and exits the BIOS Setup program
Exits the menu
Power Boot
Configures Selects boot
power options
management
features and
power supply
controls
Exit
Saves or
discards
changes to
Setup
program
options