Intel D865PCD Product Manual page 67

Table 23. Chipset Configuration Submenu (continued)
Feature
Extended Configuration
Graphics Core Frequency • Auto (default)
SDRAM Frequency
SDRAM Timing Control
CPC Override
SDRAM RAS Act. To Pre. • 8 (default)
SDRAM CAS# Latency
SDRAM RAS# to CAS#
delay
SDRAM RAS# Precharge
Options
• Default (default)
• User Defined
• 266 MHz
• 333-320 MHz
• Auto (default)
• 266 MHz
• 333 MHz
• 400 MHz
• Auto (default)
• Manual – Aggressive
• Manual – User Defined
• Auto (default)
• Enabled
• Disabled
• 7
• 6
• 5
• 2.0
• 2.5
• 3.0 (default)
• 4
• 3 (default)
• 2
• 4
• 3 (default)
• 2
Using the BIOS Setup Program
Description
Chooses the default or user defined settings for
the extended configuration options.
Allows override of detected graphics core
frequency value.
Allows override of detected memory frequency
value.
Auto allows timings to be programmed according
to the memory detected.
Manual – Aggressive selects the most aggressive
user defined timings.
Manual – User Defined allows manual override of
detected SDRAM settings.
Controls Command Per Clock/1n rule mode.
When enabled, allows DRAM controller to attempt
Chip Select assertions in two consecutive
common clocks.
Selects length of time from read to pre-change.
Corresponds to tRAS, min.
Selects the number of clock cycles required to
address a column in memory. Corresponds
to CL.
Selects the number of clock cycles between
addressing a row and addressing a column.
Corresponds to tRCD.
Selects the length of time required before
accessing a new row.
67