Pata Submenu; Pata Submenus - Intel D865PCD Product Manual

Intel Desktop Boards D865PCD Product Guide

PATA Submenu

Main Advanced
` [PATA Port-0
Type
Maximum Capacity
Configuration Options
Selected by BIOS
LBA Mode :
Block Mode:
PIO Mode :
Ultra DMA :
Cable Detected :
There are four IDE submenus: Primary master, primary slave, secondary master, and secondary
slave. Table 18 shows the format of these IDE submenus. For brevity, only one example is shown.
Table 18.

PATA Submenus

Feature
Drive Installed
Type
Maximum Capacity None
LBA Mode Control
(Note)
Block Mode
PIO Mode
(Note)
NOTE: SATA hard drives are not supported on desktop board D865PCD.
60
Security Power
:
Xxxxxxxx
[Auto]
[Auto]
[Supported]
16 sectors
Mode 4
Mode 6
Serial
Options Description
None Displays the type of drive installed.
• Auto (default)
Specifies the IDE configuration mode for IDE devices.
• User
Auto fills-in capabilities from ATA/ATAPI device.
User allows capabilities to be changed.
Displays the capacity of the drive.
None Specifies LBA mode control.
• Disabled
Check the hard disk drive's specifications for optimum
setting.
• Auto (default)
• Auto (default)
Specifies the PIO mode.
• 0
• 1
• 2
• 3
• 4
Boot Exit
]
m o
n p
Enter
F1
P9
F10
ESC
Select Screen
Select Item
Select ` Sub-Menu
General Help
Setup Defaults
Save and Exit
Exit
continued