Apm Configuration - Asus SABERTOOTH 55i - Motherboard - ATX User Manual

3.7.6

APM Configuration

APM Configuration
Restore on AC Power Loss
Power On By RTC Alarm
Power On By External Modems
Power On By PCI Devices
Power On By PCIE Devices
Power On By PS/2 Keyboard
Power On By PS/2 Mouse
Restore On AC Power Loss [Power Off]
[Power On]
[Power Off]
[Last State]
Power On By RTC Alarm [Disabled]
[Disabled]
[Enabled]
Power On By External Modems [Disabled]
[Disabled]
[Enabled]
The computer cannot receive or transmit data until the computer and applications are fully
running. Thus, connection cannot be made on the first try. Turning an external modem
off and then back on while the computer is off causes an initialization string that turns the
system power on.
Power On By PCI Devices [Disabled]
[Disabled]
[Enabled]
Power On By PCIE Devices [Disabled]
[Disabled]
[Enabled]
Power On By PS/2 Keyboard [Disabled]
[Disabled]
[Space Bar]
[Ctrl-Esc]
[Power Key]
This feature requires an ATX power supply that provides at least 1A on the +5VSB lead.
3-28
BIOS SETUP UTILITY
[Power Off]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
[Disabled]
The system goes into on state after an AC power loss.
The system goes into off state after an AC power loss.
The system goes into either off or on state, whatever the system state was
before the AC power loss.
Disables RTC to generate a wake event.
When set to [Enabled], the items RTC Alarm Date (Days) and System
Time will become user-configurable with set values.
Disables to power up the computer when the external modem receives a
call while the computer is in Soft-off mode.
The computer could be powered up when the external modem receives a
call while the computer is in Soft-off mode.
Disables the PME to wake up from S5 by PCI devices.
Allows you to turn on the system through a PCI LAN or modem card. This
feature requires an ATX power supply that provides at least 1A on the
+5VSB lead.
Disables the PCIE devices to generate a wake event.
Enables the PCIE devices to generate a wake event.
Disables the Power On by a PS/2 keyboard.
Sets the Space Bar on the PS/2 keyboard to turn on the system.
Sets the Ctrl+Esc key on the PS/2 keyboard to turn on the system.
Sets Power key on the PS/2 keyboard to turn on the system. This feature
requires an ATX power supply that provides at least 1A on the +5VSB lead.
Power
Power Off
Power On
Last State
Options
Chapter 3: BIOS setup