Boot Menu; Boot Device Priority - Asus SABERTOOTH 55i - Motherboard - ATX User Manual

Chassis Fan Profile [Standard]
This item appears only when you enable the Chassis Q-Fan Control feature and
allows you to set the appropriate performance level of the chassis fan.
[Standard] Sets to [Standard] to make the chassis fan automatically adjust depending
[Silent]
[Turbo]
CPU Voltage, 3.3V Voltage, 5V Voltage, 12V Voltage
The onboard hardware monitor automatically detects the voltage output through the onboard
voltage regulators. Select Ignored if you do not want to detect this item.
3.8

Boot menu

The Boot menu items allow you to change the system boot options. Select an item then press
<Enter> to display the submenu.
Main Ai Tweaker
Boot Settings

Boot Device Priority

Boot Settings Configuration
Security
v02.61 (C)Copyright 1985-2009, American Megatrends, Inc.
3.8.1 Boot Device Priority
Boot Device Priority
1st Boot Device
2nd Boot Device
3rd Boot Device
1st – xxth Boot Device [Removable Dev.]
These items specify the boot device priority sequence from the available devices. The
number of device items that appears on the screen depends on the number of devices
installed in the system.
Configuration options: [Removable Dev.] [Hard Drive] [ATAPI CD-ROM] [Disabled]
•
•
3-30
on the chassis temperature.
Sets to [Silent] to minimize the fan speed for quiet chassis fan operation.
Sets to [Turbo] to achieve maximum chassis fan speed.
BIOS SETUP UTILITY
Advanced
BIOS SETUP UTILITY
[Removable Dev.]
[Hard Drive]
[ATAPI CD-ROM]
To select the boot device during system startup, press <F8> when ASUS Logo appears.
To access Windows OS in Safe Mode, do any of the following:
- Press <F5> when ASUS Logo appears.
- Press <F8> after POST.
Power Boot Tools
Specifies the Boot Device
Boot Priority sequence.
A virtual floppy disk
drive (Floppy Drive B:
) may appear when you
set the CD-ROM drive
as the first boot
device.
←→
↑↓
Enter Go to Sub Screen
F1
F10
ESC
Boot
Exit
Select Screen
Select Item
General Help
Save and Exit
Exit
Chapter 3: BIOS setup