Cpu Ratio Setting [Auto]; Intel(R) Speedstep(Tm) Tech [Enabled] - Asus SABERTOOTH 55i - Motherboard - ATX User Manual

The configuration options for the following sub-items vary depending on the DIMMs you
install on the motherboard.
DRAM O.C. Profile [DDR3-1600MHz]
This item appears only when you set the Ai Overclock Tuner item to [D.O.C.P.] and allows
you to select a DRAM O.C. profile, which applies different settings to DRAM frequency,
DRAM timing and DRAM voltage. Configuration options: [DDR3-1600MHz] [DDR3-1800MHz]
[DDR3-1866MHz] [DDR3-2000MHz]
CPU Frequency (GHz)
DRAM Frequency
(MHz)
2.66
1333
Auto
1600
D.O.C.P.
Above 1600
D.O.C.P.
• When using DIMMs with a frequncy higher than the Intel
exclusive DRAM O.C. Profile function to overclock the DRAM.
• Adjust BCLK frequency to obtain a better performance after applying the D.O.C.P
function.
eXtreme Memory Profile [Disabled]
This item appears only when you set the Ai Overclock Tuner item to [X.M.P.] and allows you
to select the X.M.P. mode supported by your memory module.
[Disabled]
[High Performance]
[High Frequency]
To obtain the best performance of the X.M.P. DIMM or 1600MHz DIMM, install only one
DIMM on each memory channel.
3.5.2

CPU Ratio Setting [Auto]

Allows you to set the ratio between the CPU Core Clock and the BCLK Frequency. Use the <+>
and <-> keys to adjust the ratio. The valid value ranges vary according to your CPU model.
3.5.3

Intel(R) SpeedStep(TM) Tech [Enabled]

[Enabled] The CPU speed is controlled by the operating system.
[Disabled] The CPU runs at its default speed.
ASUS SABERTOOTH 55i
2.8
Auto
Auto
D.O.C.P.
You are not allowed to select the memory profile.
Allows your memory to work in high performance.
Allows your memory to work in high frequency.
2.93
Auto
Auto
D.O.C.P.
CPU spec, use this ASUS
®
3-15