Installation Of The Heat0Sink - Lenovo ThinkCentre A35 Service Manual

3. Locate the Pin One
Indicator on the
processor.
Installation of the heat-sink
1. Push down the
cooler clip to secure
to the retention
mechanism hooks for
all four corners.
Note:
1. Please use Intel® approved cooling fan.
2. We recommend you to apply the thermal tape to provide better heat conduction between your
CPU and heat-sink. (The CPU cooling fan might stick to the CPU due to the hardening of the
thermal paste. During this condition if you try to remove the cooling fan, you might pull the
processor out of the CPU socket alone with the cooling fan, and might damage the processor. To
avoid this from happening, we suggest you to either use thermal tape instead of thermal paste, or
remove the cooling fan with extreme caution.)
3. Make sure the CPU fan power cable is plugged in to the CPU fan connector this completes the
installation.
4. Please refer to CPU heat sink user's manual for more detail installation procedure
4. Locate Pin One in
the socket and look for
a (golden) cut edge on
the CPU upper corner.
Then insert the CPU
into the socket and
close the socket handle
2. Plug the cooler
power cable into the
CPU fan connector on
the motherboard.
15