Table of Contents
Advertisement
Chapter 7. Hardware removal and installation
This chapter provides instructions on how to remove and install hardware for your computer.
Before hardware replacement
Before replacing hardware of the computer, read this section first. You will get to know tools needed, FRU
and CRU list, system board connectors, and prerequisites for hardware replacement.
Service tool kit
Ensure that the following common service tool kit is prepared before you service the computer.
No.
Tool name
1
Screw driver: Philips Head 0
2
Screw driver: Philips Head 00
3
Screw driver: Philips Head 01
4
Screw driver: Philips Head 01
5
Screw driver: Philips Head 02
6
Screw driver: Torx Head T5
7
Screw driver: Torx Head T15
8
Screw driver: Torx Head T20
9
Screw driver: Torx Head T30
10
Pry tools 1
11
Tweezers (conductive)
© Copyright Lenovo 2024
Specific
PH0
PH00
1
1, Shank length greater than 6
inches
2, Shank length greater than 6
inches
T5
T15, for Chassis outside
T20, Shank length greater than
6 inches, for heatsink and CPU
T30, Shank length greater than
6 inches, for heatsink and CPU
N/A
N/A
Product scope
Tool type
All
Common tool
All
Common tool
All
Common tool
ThinkSation/DT
Common tool
ThinkSation/SC/DT
Common tool
IdeaPad
Common tool
ThinkSation
Common tool
ThinkSation
Common tool
ThinkSation
Common tool
All
Common tool
All
Common tool
53
Advertisement
Table of Contents
