Lenovo ThinkCentre A35 Service Manual page 49

2. AGP Set Init Display First to AGP VGA card.(Default value)
6-3 Integrated Peripherals
IDE1 Conductor Cable
1. Auto: BIOS auto-detects IDE1 conductor cable .(Default Value)
2. ATA66/100/133: Set IDE1 Conductor Cable to ATA66/100/133 (Please make sure your
IDE device and cable are compatible with ATA66/100/133).
3.ATA33: Set IDE1 Conductor Cable to ATA33. (Please make sure your IDE
device and cable are compatible with ATA33)
IDE2 Conductor Cable
1.Auto: BIOS auto-detects IDE2 conductor cable. (Default Value)
2.ATA66/100/133: Set IDE2 Conductor Cable to ATA66/100/133. (Please make sure your
IDE device and cable are compatible with ATA66/100/133)
3.ATA33: Set IDE2 Conductor Cable to ATA33. (Please make sure your IDE
device and cable are compatible with ATA33)
On-Chip Primary PCI IDE
1.Enabled: Enable onboard 1st channel IDE port. (Default value)
2.Disabled: Disable onboard 1st channel IDE port.
On-Chip Secondary PCI IDE
1.Enabled: Enable onboard 2nd channel IDE port. (Default value)
2.Disabled: Disable onboard 2nd channel IDE port.
AC97 Audio
1.Enabled: Auto-detect AC97 audio function. (Default value)
2.Disabled: Disable AC97 audio function.
USB Controller
1.Enabled: Enable USB Controller. (Default value)
48