Overview; Identifying The Components - Xerox 700 User Manual

Accessories
High Capacity Stacker (HCS)

Overview

Interface Module

Identifying the components

10-2
The High Capacity Stacker (HCS) is an optional
finishing device that provides stacking and offsetting
capabilities for output to a Stacker Tray. The HCS
connects to the right side of the digital press by way
of the Interface Module. The HCS replaces the
Offset Catch Tray (OCT).
High Capacity Stacker (HCS)
The major components of the HCS are as follows:
Control Panel - Provides manual control of the
various functions of the HCS.
Top Tray - Up to 500 sheets are transported to the
2.
Top Tray:
•
•
2
•
•
Bypass - Only used when a second
stacking/finishing device is installed. This path
transports collated sets through the HCS to a
connected finishing device or to another HCS.
Stacker Tray/Cart - Collated sets (up to a total of
4.
5000 sheets) are transported to the Stacker Tray
located on a moveable Stacker Cart.
If your system configuration has two stackers, the
bypass on the second stacker is not used.
When sheets are purged after a paper jam.
When the Sample Set button is selected.
When selected as an Output Location.
Labels must be sent to the Top Tray.
Xerox 700 Digital Color Press User Guide