Replacing The Toner Cartridges - Xerox 700 User Manual

Replacing the Toner Cartridges

Xerox 700 Digital Color Press User Guide
This procedure shows you how to remove a
used toner cartridge and replace it with a new
toner cartridge. The machine will notify you
when a new toner cartridge is needed, and
when installation is to occur. If you continue
copying or printing without replacing the toner
cartridge, a message will appear and the
machine will stop after copying or printing
around 1,800 pages for Black, or around 1200
pages for Cyan, Magenta and Yellow.
Follow the disposal instructions for the old
cartridge when you receive with the new
cartridge.
WARNING: Before you begin the procedure,
ensure that the machine has been allowed to
cool down. Failure to do so may result in
burns if certain parts of the machine are
touched.
1. Replace the toner cartridge while the
machine is on. Open the toner cover, located
just above the machine front door.
2. Lay paper on the floor before removing the
cartridge. This will allow any excess toner to
fall on the paper. Hold the handle of the color
indicated in the message, and gently pull it out.
Maintenance
7-13