Register Your Product - TRENDnet TEW-639GR Quick Installation Manual

Note:
1. To protect your network from any unauthorized access it is recommended to enable wireless
encryption.
2. The example below is for WPA2-PSK (AES) security. If you select WPA-PSK or WPA2-PSK,
make sure your wireless adapters support WPA or WPA2. If your wireless adapters do not
support WPA or WPA2, then select WEP.
3. WEP encryption only supports 802.11b/g speed of up to 54Mbps.
4. Once encryption is enabled on the router, each wireless computer and device must be
configured with the same encryption key.
6. Click Security. Select the desired WPA mode,
enter characters for your Pre-Shared key and
then click Apply. For WPA-PSK or WPA2-PSK,
the Pre-Shared Key must be between 8 and 63
ASCII or 64 HEX characters. Make sure to
copy down the Pre-Shared Key. You will need
the Pre-Shared key when you configure your
wireless adapter(s).
7. Open up your browser and enter in a URL
(e.g. www.trendnet.com) to verify that you have
Internet connection.
Your configuration is now complete
For detailed information regarding the TEW-639GR's configuration and advanced settings,
please refer to User's Guide included on the CD-ROM, or TRENDnet's website at
http://www.trendnet.com.

Register Your Product

To ensure the highest level of customer service and support, please take a moment to
register your product Online at:
Thank you for choosing TRENDnet
www.trendnet.com/register
7