Hardware Installation - TRENDnet TEW-639GR Quick Installation Manual

2. Hardware Installation

Note: Gather all information related to your Internet connection before you start. If necessary,
contact your Internet Service Provider (ISP).
1. Verify that you have an Internet connection
when connecting your computer directly to the
Cable or DSL modem. Open your browser (e.g.
Internet Explorer) and type in a URL (e.g.
http://www.trendnet.com) in the address bar.
2. Power off your cable or DSL modem.
3. Disconnect the network cable from your Cable
or DSL modem and your computer.
4. Connect one end of a network cable to one of
the TEW-639GR's network ports. Connect the
other end of the cable to the computer's
Ethernet port.
5. Connect one end of a network cable to the
TEW-639GR's WAN port. Connect the other
end of the cable to your modem's network port.
6. Connect the Power Adapter to the TEW-639GR
and then to a power outlet.
Internet
4
Cable/DSL Modem