TRENDnet TEW-639GR Quick Installation Manual page 12

LED/Button Color
Green
PWR (Power) LED
N/A
Green
Network Port
Link/Act LEDs
(Ports 1-4)
Amber
N/A
Green
WAN Link/Act LED
Amber
N/A
Green
WLAN LED
N/A
Green
WPS LED
N/A
Power Switch
N/A
(EU Version only)
Reset Button N/A
WPS Button N/A
If you still encounter problems or have any questions regarding the TEW-639GR, please contact
TRENDnet's Technical Support Department.
Sequence Definition
Solid Device is on
Off Device is off
LAN port connected at 10/20 Mbps or 100/200Mbps
Solid
(Half/Full Duplex)
LAN port data transmitting/receiving 10/20Mbps
Blinking
or 100/200Mbps (Half/Full Duplex)
Solid LAN port is connected at 2000Mbps (Full Duplex)
LAN port data transmitting/receiving at 2000Mbps
Blinking
(Full Duplex)
Off LAN port is disconnected/No Ethernet Link
WAN port is connected at 10/20Mbps or 100/200Mbps
Solid
(Half/Full Duplex)
WAN port data transmitting/receiving at 10/20Mbps
Blinking
or 100/200Mbps (Half/Full Duplex)
Solid WAN port is connected at 2000Mbps (Full Duplex)
Blinking WAN port data transmitting/receiving at 2000Mbps (Full Duplex)
Off WAN port is disconnected/No Ethernet Link
Wireless LAN is on or enabled/Wireless data transmission
Blinking
Off Wireless LAN is off or disabled
WPS authentication process complete
Solid
Blinking WPS authentication in process
Off WPS is not activated or disabled
Turns on/off power to the TEW-639GR
N/A
N/A Hold 15 seconds to reset device to factory defaults.
N/A Hold 3 seconds to activate WPS
10