Xn3410 Wiring And Applications - Clarion XN3210 Owner's Manual & Installation Manual

7. When creating passage holes for power cables, RCA's cables, and speaker wires,
use grommets to eliminate any sharp edges created during drilling. This will
protect the wire from being nicked and causing a short circuit.
8. Extra cable can cause signal loss and act as an "antenna" for noise. Use only
high-quality RCA cables that are no longer than necessary.
9. In multiple amplifier systems, it is recommended to use a relay on the remote
turn-on lead of the radio.

XN3410 WIRING AND APPLICATIONS

The Clarion XN3410 4-channel marine audio amplifier can be used in a variety of
system applications. Here are some examples to help plan your own installation.
Fig. 4
4-Channel Full Range Stereo System
CH1 Speaker
CH3 Speaker
In this application, the XN3410 is used as a 4-channel amplifier to drive four full
range speakers in stereo.
XN3210_3410 manual_060410 R2.ind9 9
CH2 Speaker
4 Ω BRIDGED
GND
+ CH1 – + CH2 –
+ CH3 – + CH4 –
4 Ω BRIDGED
CH4 Speaker
REM +12V
FUSE
30A 30A
9
XN3210/XN3410
9/3/2010 8:49:24 AM