Changing The Admin Password And User Id - HP StorageWorks 2/16 - SAN Switch Installation Manual

Managing the SAN Switch 2/16
3. Enter the password for the user:
4. If the login is successful, a prompt displays showing the switch name and user

Changing the Admin Password and User ID

Use these steps to change the admin user ID and password.
Note:
to change the admin user ID and system password.
1. Log in to the switch as the admin user.
2. At the command line, enter the following command:
3. At the New Username prompt, enter a new name for the admin user. You
4. At the Old Password prompt, enter the old password.
5. At the New Password prompt, enter the new password. The new password
6. At the New Password prompt, enter the new password exactly as entered to
7. Press Enter to commit the configuration to the firmware.
62
password: xxxxxx
The default password is password.
ID you are logged in as. For example:
switch55>admin:
For security reasons, the first time you log in to the Fabric OS you are requested
Password admin
An interactive session is opened and you are prompted for configuration
values.
can change the name of the admin user without changing the password. Press
Enter to leave the name as is.
must be between 8 to 40 characters.
the previous prompt.
SAN Switch 2/16 Version 3.1.2 Installation Guide