Rear Panel Leds; Rear Panel Led Patterns During Normal Operation - HP StorageWorks 2/16 - SAN Switch Installation Manual

Managing the SAN Switch 2/16

Rear Panel LEDs

The rear panel includes the following LEDs:
Table 6
Table 6: Rear Panel LED Patterns During Normal Operation
LED Location
Power Supply On each
LED
power
supply
Port Status LED Center of
Back Panel
58
One power supply LED for each power supply
One Port Readiness LED
describes the LEDs on the rear panel of the switch.
LED Color
Display
No light
Steady green
No Light
Hardware
Status
Power supply is Verify power
not providing supply is on and
power. power cable is
connected to a
valid power
source.
Power supply is No action
providing power. required.
Either the switch is Verify that the
off, or boot is not switch is on and
complete, or boot boot had time to
has failed. complete. If there
is still no light,
contact the switch
supplier.
SAN Switch 2/16 Version 3.1.2 Installation Guide
Recommended
Action