Backing Up the Configuration and Upgrading Firmware
Where hostIPaddr is the IP address of the host computer, user is the user ID
used to log in to this computer, path_filename is the path location and
filename of the new firmware file, and password is the password for the user
ID specified.
Note:
4. Reboot the switch by issuing the fastBoot command.
Downloading Firmware from the HP Website
To download the firmware from the HP website, go to http://www.hp.com.
The website contains the required loaders and instructions for downloading the
firmware to a switch.
70
The password operand is required only if you are using FTP.
SAN Switch 2/16 Version 3.1.2 Installation Guide