Optical
connector(s)
HP-IB connector
RS-232 connector
Rear-panel features
Figure 3-2. The HP 86060C-series rear-panel functional area
The number of optical connectors depends on the HP 86060-series switch.
The connectors are grouped as Port A and Port B.
Provides for remote control of the lightwave switch via the HP-IB interface
bus. Refer to "Programming over HP-IB" on page 4-7.
Provides for remote control of the lightwave switch via RS-232. Refer to "Pro-
gramming over RS-232" on page 4-9.
Using the Switch
Rear-panel features
3-5