Editing An Ipsec Policy; Deleting An Ipsec Policy - HP StorageWorks 1000 - Modular Smart Array User Manual

4. To save the new IPsec policy and close the IPsec Policy dialog box, click OK. To abandon creation of
the IPsec policy, click Cancel.
5. When you are through managing security policies, select one of the following options:
• To save your changes and close the IPsec Configuration dialog box, click OK.
• To close the IPsec Configuration dialog box without saving any changes, click Cancel.
CAUTION: Be aware that if you click Cancel on the IPsec Configuration dialog box, all changes you have
made to IPsec associations and policies are revoked. That is, all associations and policies that you have
created, edited, deleted, copied, or pasted while the IPsec Configuration dialog box was open are
nullified.

Editing an IPsec policy

To edit an IPsec policy:
1. On the HBA & Switch Management menu, click Set Switch IPsec Information. (If you have more than
one switch in your SAN, the Switch Selection dialog box prompts you to select a switch, and then click
OK.)
The IPsec Configuration dialog box opens (see
Associations on the left and the existing IPsec Policies on the right.
2. Under IPsec Policies, select the policy that you want to modify, and then click Edit.
The IPsec Policy dialog box opens
3. Modify the existing security policy settings, and then click OK to save your changes. (For an
explanation on each of the fields on the IPsec Policy dialog box, see
page 70.)
4. When you are through managing security policies, select one of the following options:
• To save your changes and close the IPsec Configuration dialog box, click OK.
• To close the IPsec Configuration dialog box without saving any changes, click Cancel.
CAUTION: Be aware that if you click Cancel on the IPsec Configuration dialog box, all changes you have
made to IPsec associations and policies are revoked. That is, all associations and policies that you have
created, edited, deleted, copied, or pasted while the IPsec Configuration dialog box was open are
nullified.

Deleting an IPsec policy

To delete an IPsec policy:
1. On the HBA & Switch Management menu, click Set Switch IPsec Information. (If you have more than
one switch in your SAN, the Switch Selection dialog box prompts you to select a switch, and then click
OK.)
The IPsec Configuration dialog box opens (see
Associations on the left and the existing IPsec Policies on the right.
2. Under IPsec Policies, select the policy that you want to remove, and then click Delete.
3. When you are through managing security policies, select one of the following options:
• To save your changes and close the IPsec Configuration dialog box, click OK.
• To close the IPsec Configuration dialog box without saving any changes, click Cancel.
CAUTION: Be aware that if you click Cancel on the IPsec Configuration dialog box, all changes you have
made to IPsec associations and policies are revoked. That is, all associations and policies that you have
created, edited, deleted, copied, or pasted while the IPsec Configuration dialog box was open are
nullified.
Figure 40 on page 70) and lists the existing IPsec
(Figure 41 on page 71).
Figure 40 on page 70) and lists the existing IPsec
HP StorageWorks Simple SAN Connection Manager user guide
"Creating an IPsec policy" on
73