Set Switch Ip Address Dialog Box: New Switch Setup; First Step Of New Switch Setup Completed - HP StorageWorks 1000 - Modular Smart Array User Manual

Figure 13

Set Switch IP Address dialog box: new switch setup

6. Select either the Enable IPv4 or Enable IPv6 check box, and then complete the appropriate IPv4 or IPv6
information (for details, see
The New Switch Setup dialog box now shows a check mark next to the first step, "Set switch IP
address," (Figure 14) indicating that you have completed that task.
Figure 14

First step of New Switch Setup completed

7. A message box asks if you want to change the factory default switch administrator password. Choose
one of the following options:
• To continue with the next step of switch setup, click Yes. The Set Switch Admin Password dialog box
(Figure 15) opens. Go to
• To change the default password later, click No. (See
for a procedure for changing the switch admin password—either the default or the current
password—to a new password.)
"Setting the switch IP address"
step 8.
HP StorageWorks Simple SAN Connection Manager user guide
on page 55). Click OK.
"Setting the switch admin password," page 55,
37