Creating An Ipsec Association; Ipsec Configuration Dialog Box - HP StorageWorks 1000 - Modular Smart Array User Manual

Creating an IPsec association

To create an IPsec association:
1. On the HBA & Switch Management menu, click Set Switch IPsec Information. (If you have more than
one switch in your SAN, the Switch Selection dialog box prompts you to select a switch, and then click
OK.)
The IPsec Configuration dialog box opens
and the existing IPsec Policies on the right.
Figure 38

IPsec Configuration dialog box

2. Under IPsec Associations, click Create.
The IPsec Association dialog box opens
asterisk.
NOTE:
associations.
Simple SAN Connection Manager allows you to create a maximum of 512 IPsec
(Figure 38) and lists the existing IPsec Associations on the left
(Figure 39). You must complete all fields prefaced by a red
HP StorageWorks Simple SAN Connection Manager user guide 65