Number Buttons - Sony MEX-BT31PW Operating Instructions Manual

 USB port page 13, 14, 15

(BACK)/MODE button page 11,
15, 16, 24, 28
Press to return to the previous display;
select the radio band (FM/AM).
Press and hold to enter/cancel the
passenger control (iPod); enter the
bookmark mode (Pandora® via USB/
Bluetooth Pandora®).
Press to activate/deactivate the
appropriate device (this unit/cellular
phone) (Bluetooth phone).
 Front panel release button page 7

(BROWSE) button page 16, 18, 28
To enter the Quick-BrowZer™ mode
(CD/USB); list the station (Pandora® via
USB/Bluetooth Pandora®).
 PTY (Program Type) button page 11
To select PTY in RDS.

 Number buttons

Radio:
To receive stored stations (press); store
stations (press and hold).
CD/USB:
/: ALBUM / (during MP3/
WMA/AAC playback)
To skip an album (press); skip
albums continuously (press and
hold).
:
(Repeat)*
: SHUF page 17
: ZAP page 19
: PAUSE
To pause playback. Press again to
resume playback.
Pandora® via USB/Bluetooth
Pandora®:
/: Thumbs down ()/up ()
(press and hold for 1 second) page 16,
28
: PAUSE
To pause playback. Press again to
resume playback.
Bluetooth Audio*
/: ALBUM /
:
(Repeat)*
page 17
3
:
2
page 26
3
: SHUF page 26
: PAUSE
To pause playback. Press again to
resume playback.
Bluetooth phone: page 24, 25
To call a stored phone number (press);
to store a phone number as a preset
(press and hold) (in the call menu).
: MIC (during a call) page 24
To set the MIC gain (press); to
select Echo Canceler/Noise
Canceler mode (press and hold).
 DSPL (Display)/SCRL (Scroll) button
page 11, 12, 13, 14, 16, 22, 26, 28
To change display items (press); scroll a
display item (press and hold).
 AUX input jack page 34
 Microphone (on the inner panel)
To make the handsfree function work
properly, do not cover the microphone
with tape, etc.
*1 Depending on the device connected to the
USB port, Bluetooth Pandora® may not be
available.
*2 When a Bluetooth audio device (supports
AVRCP of Bluetooth technology) is
connected. Depending on the device, certain
operations may not be available.
*3 This button has a tactile dot.
Note
If the unit is turned off and the display
disappears, the unit cannot be operated with the
remote commander unless  on
the unit is pressed, or a disc is inserted to activate
the unit first.
9