Disc Slot; Display Window; Number Buttons - Sony CDX-GT292 Operating Instructions Manual

Car audio and car goods internet store Winauto
E Disc slot
Insert the disc (label side up), playback
starts.
F Display window
G AUX input jack page 11
To connect a portable audio device.
H Z (eject) button
To eject the disc.
I
(front panel release) button page 5
J MODE button page 8
To select the radio band (FM/MW/SW).
K DSPL (display)/SCRL (scroll) button
page 8, 9
To change display items (press); scroll the
display item (press and hold).
L PTY button page 8
To select PTY in RDS.
M Frequency select switch (located on the
bottom of the unit)
See "Frequency select switch" in the
supplied installation/connections manual.
N Number buttons
CD:
(1)/(2): ALBUM –/+ (during MP3/WMA
playback)
To skip albums (press); skip albums
continuously (press and hold).
(3): REP* page 9
2
(4): SHUF page 9
(6): PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
O Receptor for the card remote
commander
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
qh OFF button
To turn off; stop the source.
qj SOURCE button
To turn on; change the source (Radio/CD/
AUX).
qk < (.)/, (>) buttons
To control radio/CD, the same as (SEEK)
–/+ on the unit.
Setup, sound setting, etc., can be operated by
< ,.
ql DSPL (display) button
To change display items.
w; VOL (volume) +*
To adjust volume.
wa ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
ws SEL (select) button
The same as the select button on the unit.
wd M (+)/m (–) buttons
To control CD, the same as (1)/(2)
(ALBUM –/+) on the unit.
Setup, sound setting, etc., can be operated by
M m.
wf SCRL (scroll) button
To scroll the display item.
wg Number buttons
To receive stored stations (press); store
stations (press and hold).
*1 EX BASS in the case of CDX-GT290EB. The EX
BASS setting is recommended for the supplied
speakers.
*2 This button has a tactile dot.
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless (SOURCE/OFF) on the unit is pressed, or a disc
is inserted to activate the unit first.
2 /– button
7