Asus P7H55-M LE User Manual page 23

7. Front panel audio connector (10-1 pin AAFP)
This connector is for a chassis-mounted front panel audio I/O module that supports
either High Definition Audio or AC`97 audio standard. Connect one end of the front
panel audio I/O module cable to this connector.
P7H55-M LE Front panel audio connector
If you want to connect a high-definition front panel audio module to this connector, ensure
that the Front Panel Type item in the BIOS is set to [HD Audio]. If you want to connect an
AC97 front panel audio module to this connector, set the item to [AC97]. See section 2.4.3
Onboard Devices Configuration for details.
8. Floppy disk drive connector (34-1 pin FLOPPY) (for P7H55-M LE only)
This connector is for the floppy disk drive (FDD) signal cable. Insert one end of the
cable to this connector, then connect the other end to the signal connector at the back
of the floppy disk drive.
• Pin 5 on the connector is removed to prevent incorrect cable connection when using a
• The FDD cable is purchased separately.
P7H55-M LE Floppy disk drive connector
ASUS P7H55-M LE Series
AAFP
FDD cable with a covered Pin 5.
PIN 1 PIN 1
HD-audio-compliant
pin definition
FLOPPY
NOTE:Orient the red markings
on the floppy ribbon cable to PIN 1.
Legacy AC'97
compliant definition
1-14