Kyocera TASKalfa 820 Operation Manual page 37

10
Set the original to be scanned and press the [Start]
key. The scanning operation will begin.
Notes
• You can change the scan settings as desired by simply performing the corresponding setting
procedure on the scanner's operation panel.
• If you perform the same settings both from your computer and at the scanner itself, the specific
settings made at the scanner will take priority.
If you want to change any of the file
information that you registered, press
[Try again input data].
11 Once the scanning operation is
complete, the following screen will be
displayed. If there are no more originals
to be scanned, press [Input data
complete].
• If you are using the PDF Keyword
Assist option, the file information
that you just registered will be
added to the scanned image data
file and that file will be saved into
the designated folder.
• If you are using the Database Assist option, the file information that you just registered will be
saved as a csv file and that file will be saved together with the scanned image data file into the
designated folder.
Note
• If you want to use the Database Connection function once again, press [Sel.folder input data]
and perform the procedure from step 4 on page 27.
• If you want to use the Database Connection function once again, and at the same settings,
press [Same made input data] and perform the procedure from step 6 on page 28.If you want to
use the Database Connection function once again, and under the same option (PDF Keyword
Assist vs. Database Assist), press [Input of new data] and perform the procedure from step 5 on
page 27.
Performing the Required Operation at the Scanner
Ready to scan.
Place originals then press Start key .
Database Connection
Dest. of input data
Program 02
Try again
input data
a complete].
od to continue
on
How-continue
very
Same mode
input data
Sel.folder Input of
input data new data
Origi
A4
0
Auto Top Edge Top
Original Original
Size Orient.
Auto size 300dpi
Sending Scan
Size Resolution
Quality
Basic
10/10/`08 10:10
Cancel
Input data
complete
29