Configure The Settings Relating To H.264 Images [Jpeg/H.264] - Panasonic WV-SC384 Operating Instructions Manual

Configure the settings relating to H.264 images [JPEG/H.264]

Click the [JPEG/H.24] tab on the "Image/Audio" page. (☞ Pages 26 and 27: How to display/operate the setup
menu)
[JPEG/H.264] tab will be displayed when "H.264" is selected for "Video encoding format".
Configure the settings relating to H.264 image such as "Max bit rate (per client)", "Image capture size", "Image
quality", etc. in this section. Refer to page 53 and 47 for the settings relating to MPEG-4 images and JPEG images
respectively.
[Video encoding format]
Select "H.264" for the video encoding format.
H.264: H.264 will be set for the video encoding format.
The subsequent setting items will be for H.264. The
tab name will be changed to [JPEG/H.264].
MPEG-4: MPEG-4 will be set for the video encoding
format. The subsequent setting items will be for
MPEG-4. (☞ Page 53)
The tab name will be changed to [JPEG/MPEG-4].
Default: H.264
■H.264 (1) · H.264 (2)
[H.264 transmission]
Select "On" or "Off" to determine whether or not to
transmit H.264 images.
On: Transmits H.264 images.
Off: Does not transmit H.264 images.
Default: On
Note:
• When "On" is selected for "H.264 transmission" in
"H.264(1)" or "H.264(2)", displaying of H.264 images
or JPEG images on the "Live" page will become
available.
• When "On" is selected for "H.264 transmission" in
"H.264(1)" and "H.264(2)", H.264 images are view-
able using other devices with each setting.
• When "On" is selected for "H.264 transmission" in
"H.264(1)" or "H.264(2)", the transmission interval of
JPEG images may sometimes become longer.
• When "H.264" is selected for "Recording format" , it
is impossible to transmit H.264 images with the set-
tings for "H.264(2)". In this case, the settings for
"H.264(2)" are invalidated.
[Internet mode (over HTTP)]
Select "On" when transmitting H.264 images via the
Internet. It is possible to transmit H.264 images without
changing the broadband router settings configured for
JPEG image transmission.
On: H.264 images and audio will be transmitted using
the HTTP port. Refer to page 94 for further informa-
tion about the HTTP port number settings.
Off: H.264 images and audio will be transmitted using
the UDP port.
Default: Off
Note:
• When "On" is selected, only "Unicast port (AUTO)"
will be available for "Transmission type".
• When "On" is selected, it may take time to start dis-
playing H.264 images.
49