ZyXEL Communications P-663H-51 User Manual page 72

Chapter 6 LAN Setup
Table 19 Advanced Setup > LAN (continued)
LABEL
Disable/Enable
DHCP Server
Configure the
second IP address
and subnet mask
for LAN interface
Save
Save/Reboot
72
DESCRIPTION
Turn on the DHCP server to have the ZyXEL Device assign IP addresses, an IP
default gateway and DNS servers to DHCP clients on the LAN.
Enter IP addresses in the Start and End IP Address fields to set a range of IP
addresses for the ZyXEL Device to give to the DHCP clients.
Enter an IP address in the Start IP Address field and a subnet mask in the
Subnet Mask field to set a subnet of IP addresses for the ZyXEL Device to give
to the DHCP clients.
Leased Time sets how many hours to let a DHCP client use an IP before re-
assigning it an IP address.
Select this option to let the ZyXEL Device use a second IP address on the LAN
interface. You can also use this second IP address to access the ZyXEL Device
for management. Enter the LAN IP address of your ZyXEL Device in dotted
decimal notation, for example, 10.0.0.1. Type the subnet mask.
Click Save to save your changes to the ZyXEL Device.
Click this button to apply and save your changes. The ZyXEL Device restarts.
P-663H-51 User's Guide