How To Scan To A Computer; Scanning A Document; Scanning Using The Scan Key - Brother DCP-J140W Basic User's Manual

6

How to scan to a computer

Scanning a document

There are several ways to scan documents.
You can use the SCAN key on the machine or
the scanner drivers on your computer.
a
To use the machine as a scanner, you
must install a scanner driver. If the
machine is on a Network, configure it
with a TCP/IP address.
Install the scanner drivers from the

CD-ROM. (uuQuick Setup Guide)
 Configure the machine with a TCP/IP
address if network scanning does not
work. (uuSoftware User's Guide:
Configuring Network Scanning for
®
Windows and Configuring network
scanning for Macintosh)
b
Load your document. (See How to load
documents uu page 17.)
c
Do one of the following:
To scan using the SCAN key on the

machine, go to Scanning using the
SCAN key.
 To scan using a scanner driver at
your computer, go to Scanning using
a scanner driver.
22
Scanning using the
6
SCAN key
For more information
uuSoftware User's Guide: Using the Scan
key
a
Press
b
Press a or b to choose the available
scan modes as follows.
Press OK.

Scan to E-mail

Scan to Image

Scan to File

Web Service
(Web Services Scan)
1
(Windows
(uuSoftware User's Guide: Using Web
Services for scanning on your network
(Windows Vista
Windows
c
(For network users)
Press a or b to choose the computer you
want to send the data to.
Press OK.
d
Press Mono Start or Colour Start to
begin scanning.
(SCAN).
1
®
only)
®
SP2 or later and
®
7))
6
6