Oki MPS711c User Manual page 58

ITEM
Bi-Direction Enable /
Disable
ECP Enable /
Disable
Ack Width
Narrow/
Medium/
Wide
Ack / Busy Ack in Busy /
Timing Ack while Busy
I-prime 3µsec/50µsec /
Disable
Offline Enable /
Receive Disable
58
SETTINGS
– MPS610c/MPS711c User's Guide
EXPLANATION
ENABLE/DISABLE the bi-directional
capability of the parallel interface.
Extended Capabilities Port, enables/disables
this function.
Sets ACK width for compatible reception.
= 0.5 µs
= 1.0 µs
= 3.0 µs
ACK IN BUSY: BUSY=LOW-> The end of
ACK pulse.
ACK WHILE BUSY: BUSY=LOW -> The
center of ACK pulse.
3 microseconds: Enabled with the 3 µs nInit
signal.
50 microseconds: Enabled with the 50 µs
nInit signal.
To Enable/disable this function. When set to
Enable, the interface retains a receive
possible state even when switching to
Offline. Interface sends the BUSY signal
only when the receive buffer is full or a
service call occurs.