Oki MPS711c User Manual page 52

ITEM
SD Card Resize
Setup Partition
(cont.)
52
SETTINGS
PCL nn%/
Common mm%/
PSll%/<Apply>
– MPS610c/MPS711c User's Guide
EXPLANATION
Specifies the size of partition.
Specifies a size by ratio to the
whole SD Card in % (1% unit).
nn,mm,ll: 1 - 98 and
nn+mm+ll=100
The sizes are displayed in the
partition list and can be changed
by selecting the partition size to
be changed. If Apply is selected,
the following confirmation
message appears.
Are You Sure? Yes/No
No = return to the previous
menu.
Yes = Execute Now? Yes/No
No = return to the previous
menu. The request is put into the
memory and the SD Card
initialization and partition size
change will be executed at next
power cycle.
Yes = shutdown. SD Card
initialization and partition size
change will be executed at Power
Off/On cycle. (If one partition
size is modified, the others are
also modified.) If any partition
size is modified, Initialization of
SD Card needs to be executed as
well.
If a previously used SD Card is
installed, SD Card initialization
also takes place. If an SD Card,
which has been used before, is
installed, the layout of this menu
may be different from that of
each partition. (The previously
used layout will be displayed.)