Oki MPS711c User Manual page 41

ITEM
Print Toner Save
Setup Mode
(cont.)
Mono-Print
Speed
Default
Orientation
Form
Length
41
SETTINGS
On/Off
Auto
Color Speed
Normal Speed
Portrait
Landscape
5 lines
~
64 lines
~
128 lines
– MPS610c/MPS711c User's Guide
EXPLANATION
This function works effectively
only if the data input is color RGB
data. This setting is valid in PS
and PCL, but does not take effect
in the following cases.
(1) PS: If Color Matching is set
OFF.
(2) PS: If any setting other than
ASIC Color Matching is set.
(3) PS: CMYK data when Ink
Simulation Mode is used (valid in
any other cases except Case (1)
and Case (2) above as long as
data is RGB).
(4) PCL binary data (Color/
Monochrome).
Sets the monochrome print
speed. Prints at the most
appropriate speed for page
process if Auto is set.
Prints always at the color print
speed if Color is set.
Prints always at the monochrome
print speed if Normal is set.
Specifies print orientation.
Not valid for PS (valid only for
PCL/ IBMPPR/EPSONFX/ HP-
GL2).
Sets the number of lines that can
be printed on a page
Not valid for PS (valid only for
PCL/HP-GL2).
Default values listed to the left
are for Letter/A4. In practice,
however, they change according
to the size of paper loaded in the
tray.