4
Installing WES2009 Firmware
This chapter includes the requirements and procedures you need to install and use Wyse
USB Firmware Tool to update your thin client to WES2009 firmware.
Requirements
•
•
Tip
The purpose of the Wyse USB Firmware Tool is to configure a bootable USB
key for device firmware. In the following procedures, you will create a
configured USB key containing the firmware contents that you need, and
then boot from this configured USB key on appropriate product and flash size
devices to push the contents of the USB key onto these target devices.
Machine with a minimum of 4 GB of free space running either of the following:
·
Windows XP Professional SP3
·
Windows 2003 Server
·
Windows Server 2008 R2
·
Windows 7 Enterprise (32-bit and 64-bit)
·
Windows 7 Ultimate (32-bit and 64-bit)
USB key size should be 4 GB or larger (up to 16 GB tested—see "USB Keys -
Troubleshooting Boot Issues")
Caution
During the USB key configuration process the USB key will be reformatted.