3
Installing R Class Flash
This chapter contains information for R50L, R50LE, R90L, R90LE, R90LW, R90LEW, and
R90L7 cloud client users who must install new flash.
Requirements
•
•
•
Procedures
Perform a hardware installation (install new flash), by completing one of the following
(depending on your cloud client class):
Small Phillips screwdriver
Needle-nose pliers
(Optional) Container for holding screws
Warning
Flash modules may be susceptible to damage by Electro-Static Discharge
(ESD). All industry-standard cautions should be followed to avoid ESD.
Before you remove or install a module, touch any metal part of the chassis
and keep that contact with the chassis during the installation process.
•
"Installing R50L, R90L, R90LW, or R90L7 Cloud Client Flash"
•
"Installing R50LE, R90LE, R90LEW, or R90LE7 Cloud Client Flash"