What's Next - Wyse C90LEW Installation Manual

Installing R Class Flash
Figure 4 Removing the existing flash module
6. Install the new flash module in the reverse order of removing the original flash module.
Carefully press the flash module onto the standoff lock and connector, making sure to
lock it into place.
7. Replace the left side cover in the reverse order of removing it as described in steps 4
and 3.
8. Attach the vertical foot.
9. Reconnect the video display, keyboard, mouse, and power adapter to the cloud client
before connecting to an electrical outlet.
Caution
Do not turn on the cloud client. The cloud client is ready to re-image,
however the flash module does not contain an operating system. Turning on
power to your cloud client without firmware will display the error message
"NO OPERATING SYSTEM FOUND."

What's Next

Continue with "Installing Firmware."
7