Procedures - Wyse C90LEW Installation Manual

12
Chapter 4

Procedures

Complete the following procedures as an administrator (administrator privileges are
required).
Step 1: Download and Ready the Firmware You Require
You must download and ready (extract) the firmware you want to use for updating your
devices before you start the Wyse USB Firmware Tool wizard. Firmware files are normally
made available in .exe or .zip format and must be downloaded and then extracted to a
local hard drive folder that is available to the Wyse USB Firmware Tool wizard.
Wyse provides firmware for supported devices from its Software Downloads Web site at:
http://www.wyse.com/serviceandsupport/support/downloads.asp. Simply select the
firmware you need in the Product Downloads Active box, click Search, and use the Active
Firmware link you need.
The following are examples of the Active Firmware links that you must use (names to
click) to download and extract the firmware to the local hard drive folder you want:
•
•
•
•
•
•
•
Caution
For the Windows 7 Enterprise 32-bit operating system, be sure to right-click
on the .exe file you downloaded (for example, the
11.1.015_R50LE_merlin.exe file for the Linux R50L/R50LE OS image) and
select the Run as administrator option to extract the files.
Tip
In some cases (for example, the C50LE and R50L/R50LE OS images, the
name of the link you need is WDM Image as the firmware image is for use
with Wyse Device Manager (WDM) and USB Firmware Tool deployment.
C30LE Only - CE 6.0 Wyse WFR4 Build 666 for 128MB flash
C50LE, R50L, and R50LE Only - WDM Image
C90LE, R90L, and R90LE Only - XPE SP3 WFR3
C90LEW Only - WES C90LEW Image
R90LW and R90LEW Only - WES R90LW/R90LEW Image
C90LE7 Only - WES C90LE7 Image
R90L7 and R90LE7 Only - WES R90L7/R90LE7 Image