Installing Firmware; Installing Firmware Requirements - Wyse C90LEW Installation Manual

4

Installing Firmware

This chapter includes the requirements and procedures you need to install and use Wyse
USB Firmware Tool
Requirements
•
•
TM
to update your cloud client to the firmware you need.
Tip
The purpose of the Wyse USB Firmware Tool is to configure a bootable USB
key for device firmware. In the following procedures, you will create a
configured USB key containing the firmware contents that you need, and
then boot from this configured USB key on appropriate product and flash size
devices to push the contents of the USB key onto these target devices
(containing your upgraded flash).
Machine running either Windows XP Professional SP3, Windows 2003 Server,
Windows 7 Enterprise (32-bit), or Windows 7 Ultimate (64-bit)
USB key size should be 4 GB or larger (up to 16 GB tested—see "USB Keys -
Troubleshooting Boot Issues") depending on your needs.
Caution
During the USB key configuration process the USB key will be reformatted.
®