Wake Up Timer - Teac SR-100i Owner's Manual

You can set the unit to turn on at specific times.
< Adjust the clock before setting the wake up timer
(page 15).
Setting the wake up timer
1
If the unit is on, press the STANDBY/ON ( )
button to turn it off.
2
Press the TIMER button repeatedly until
"ALM SET" appears on the display.
The clock hour value blinks.
< If no button is pressed for 30 seconds, the timer
setting mode will be cancelled.
3
Press the VOLUME ( + / – ) buttons to set the
hour, then press the TIMER button.
The clock minute value blinks.

Wake Up Timer

4
Press the VOLUME ( + / – ) buttons to set the
minute, then press the TIMER button.
The current setting value blinks.
5
Press the VOLUME ( + / – ) buttons to select "ON",
then press the TIMER button.
The timer set has been set. "ON" and the current time
is displayed.
When the setting time arrives, the last selected
source starts playback.
< To turn off the wake up timer, select "OFF" in step
When the timer reaches the timer-on time, the unit
is set to "SLEEP 60" automatically and the power will
be switched off (standby) 60 minutes later.
If you want to listen continuously, press the SLEEP button
repeatedly to select "--" after reaches the timer-on-time.
Note for use with an iPod touch/iPhone
(When using SR-100i wake up timer with an iPod
touch/iPhone as the source)
< If you turn the power of the iPod touch/iPhone off
("Slide to power off"), you cannot use it with the
wake up timer even if it is docked in this unit. To use
the wake up timer with an iPod touch/iPhone as
the source, do not select "Slide to power off" on the
iPod touch/iPhone. (The screen of the iPod touch/
iPhone can be turned off without any problem.)
< If Video is displayed on the iPod touch/iPhone's
screen, you cannot use it with the wake up timer
even if it is docked in this unit. To use the wake up
timer with an iPod touch/iPhone as the source,
select any item other than Video on the iPod touch/
iPhone.
.
5
31